Glass Cutter For Mirror Left Handed with Oil Glass Drill Bits Mirror Cutter For Beginner Or Pro Glass Running Pliers Built Into Mirror Cutter Tool For Cutting Thick Mirror Thin Mirror and Mirror Tiles

Product Description

Glass Cutter for Mirror – Not just any Glass Cutting Tool The Amazing Glass Cutter made in UK a manual Glass Cutter that lets you cut straight radius and wavy lines in glass mirror, stained glass and glass tiles. The scoring wheel is not sharp, it is probably the dullest tool you will own but the hardest, the hardness of the cutter blade along with the special angle ground into the scoring wheel allows The Amazing Glass Cutter to cut thick and thin glass materials and even Hard Tile without hurting the wheel. The Secret to using The Amazing Glass Cutter is to follow the instructions carefully. Practice on a spare piece in order to work out enough pressure to apply, usually not enough pressure is applied to start with but sometimes less pressure is better so practice makes perfect. Cutting on the floor instead of on a solid board at waist height will fail and give uneven pressure along the score line and may even crack glass. Not oiling the scoring wheel and making sure it is turning very freely may cause the wheel to bind, drag and even lock up and just scratch the glass instead of evenly scoring it and this will prevent the glass cutter from working correctly. Holding the Glass Cutter by the plastic grips when scoring with your strongest hand means that you are only applying minimal amount of pressure if any on the cutting wheel at the point where the scoring is happening. Always Pull towards you not push Away. For Stained Glass, Plate Glass, Picture Framing Glass or Fused Glass the cutting wheel should be oiled every single score, oil will run down onto the glass and will not only cool down the glass and give a cleaner cut it will also extend the life of the cutting wheel. If you can wipe the oil off the glass and there is no score line visible, then you need to increase the pressure – make sure you are holding close to the wheel and use the 2 handed method if needed especially if you do not have a lot of strength in your hands or are cutting a very hard material.

• MIRROR CUTTER - Watch Mirror Cutting Videos Read Tips And Instructions and Download User Guide. Must Soak Mirror Cutting Tool Wheel in Glass Cutting Oil, Run Wheel Up And Down A Board To Check Wheel is Spinning Freely So It Can Score Mirror Evenly If Mirror Cutting Blade Stops It Will Not Score. Mirror Cutter Wheel Must Be Oiled Every Cut, A Dry Wheel Will Stick and Drag Across And That Will Not Make a Good Score. Practice On Scrap Mirror Before Making Final Cut To Ensure You Have The Technique. • DIAMOND TIP DRILL BIT Diamond Drill Bits Drill Glass Bottles Plates Mosaics Crafts Use Glass Tile Drill Bits To Mount Grab Bars Hooks And Towel Rails In Glass Tile Mirror Tile Installing Shower Doors • SPEAR POINT GLASS DRILL BIT For Glass Spade Bit Best Used In Drill Very Low Speed Clean Holes When Drilling Glass Bottles For Cables For Lights Lamps And Glass Crafts Drill Holes In Clay Plant Pots China Plates Marble Slate Wall Tile And Travertine • THE AMAZING GLASS CUTTER Stained Glass Cutter Made In Uk Cut Stained Glass Sheets Glass Tile Cutter Hand Tool Cut These Mirror Glass Cutters Tools Are For Plate Glass Stained Glass Mosaic Glass Window Pane Mirror Tile Tools And Glass Bottle Cutter Oil Included • HARDEST GLASS CUTTER WHEEL Available Originally We Made It Tough Enough For Cutting Shapes In Floor Tiles Ceramic Tiles And Even Quarry Tiles By Accident We Ended Up With What We Believe Is The Best Glass Cutter Available - This Wheel Is The Hardest Not The Sharpest It Does Need Oil To Work, We Supply Enough Glass Cutter Oil To Get You Started Cutting Glass Like A Professional Glass Cutter