Glass Cutter For Thick Glass Storm Door Window Panes and Glass Tiles, 2 Tools in 1 Glass Scoring Tool and Glass Breaking Tool with Glass Cutting Oil, Cut Greenhouse to Picture Frame Glass Sheet 1-22mm

Product Description

Glass Cutter – Not just any Glass Cutting Tool The Amazing Glass Cutter made in UK a manual Glass Cutter that lets you cut straight radius and wavy lines in glass mirror, stained glass and glass tiles. The scoring wheel is not sharp, it is probably the dullest tool you will own but the hardest, the hardness of the cutter blade along with the special angle ground into the scoring wheel allows The Amazing Glass Cutter to cut thick and thin glass materials and even Hard Tile without hurting the wheel. The Secret to using The Amazing Glass Cutter is to follow the instructions carefully. Practice on a spare piece in order to work out enough pressure to apply, usually not enough pressure is applied to start with but sometimes less pressure is better so practice makes perfect. Cutting on the floor instead of on a solid board at waist height will fail and give uneven pressure along the score line and may even crack glass. Not oiling the scoring wheel and making sure it is turning very freely may cause the wheel to bind, drag and even lock up and just scratch the glass instead of evenly scoring it and this will prevent the glass cutter from working correctly. Holding the Glass Cutter by the plastic grips when scoring with your strongest hand means that you are only applying minimal amount of pressure if any on the cutting wheel at the point where the scoring is happening. Always Pull towards you not push Away. For Stained Glass, Plate Glass, Picture Framing Glass or Fused Glass the cutting wheel should be oiled every single score, oil will run down onto the glass and will not only cool down the glass and give a cleaner cut it will also extend the life of the cutting wheel. If you can wipe the oil off the glass and there is no score line visible, then you need to increase the pressure – make sure you are holding close to the wheel and use the 2 handed method if needed especially if you do not have a lot of strength in your hands or are cutting a very hard material.

• GLASS CUTTER - Watch Glass Cutting Videos and Read All Included Tips And Instructions. Must Soak Glass Cutting Tool Wheel in Glass Cutting Oil, Run Wheel Up And Down A Board To Check Wheel is Spinning Freely So It Can Score Glass Evenly If Glass Cutting Blade Stops It Will Not Score. Glass Cutter Wheel Must Be Oiled Every Cut, A Dry Wheel Will Stick and Drag Across And That Stops it Being a Good Glass Scorer. Practice On Scrap Glass Sheet Before Making Final Cut To Check You Have Technique Down. • HOLD GLASS CUTTING TOOL – Handles Of Glass Cutter Tool Are Only For Squeezing Glass To Break, Do Not Hold Glass Cutter by Handles When Scoring. Hold Close To The Wheel for Control And Pressure on Glass Scorer. The Technique is to Create A Small V In Surface Of Glass Sheet. Scoring Way Too Hard Or Without Oiling Wheel Leaves A Wide Groove And White Dusty Line that Will Not Break On The Line Instead Of A Shallow V, The Perfect Glass Score Must Be Just Firm Enough To Leave the V Score in Glass. • CUT STRAIGHT LINE IN GLASS – Place Glass Sheet On A Board At Waist Height, Scoring Glass on A Soft Carpet, Scoring Too Hard or More Than Once Will Cause Glass To Shatter When You Go to Break Glass. Draw A Line On Glass With A Marker, Follow Line By Pulling Cutter Towards You, Never Push Away, Watch The Back Of The Glass Cutter Wheel to Keep on Line or Use Flat Side Of Glass Cutting Wheel To Run Along A Very Smooth Straight Edge Guide At Least 2mm Thick, Guide Can Be Taped Down To Prevent Moving. • BREAKING GLASS – Place Running Pliers Breaker Of Glass Cutter Dead Center Over Score Line, Lift Glass And Squeeze Handles Ever So Gently. Over Squeezing Can Chip Edges Of Glass. Large Glass Sheet Use Piece Of Wood Under The Score Line And Bend Glass Over It Or Over Edge Of Bench, Watch Videos For More Info. Trimming Edge Of Glass Is Possible Within Laws Of Physics For Any Glass Cutter. Do Not Try To Cut Less Than 4 Times Thickness Of Glass From Edge, Less May Be Possible Off Edge With Practice. • CUTTING GLASS TILE – Glass Mosaic Tile On A Sheet Are Difficult To Cut With A Wet Saw It Chips Edges, The Glass Cutters Tool Is The Best Glass Tile Cutter It Cuts Cleaner Than Any Other Glass Tile Cutting Tool. Sheet Can Be Scored In One But Glass Tiles Must Be Split 1 At A Time, All Glass Tiles Are Different, Practice With Glass Cutter, Start Scoring Firm Pressure, Gradually Lighten It To Get To A Stage Where You Are Scoring Just Firm Enough To Score Glass But Hard Enough The Glass Tile Breaks.