Glass Cutter for Thick Glass Running Pliers Built Into Glass Cutting Tool Diamond Glass Drill Bits for Glass Bottle Light and Lamp Making Glass Hole Saw for Bottle Bird Feeder and Glass Block Crafts

Name: Glass Cutter for Thick Glass Running Pliers Built Into Glass Cutting Tool Diamond Glass Drill Bits for Glass Bottle Light and Lamp Making Glass Hole Saw for Bottle Bird Feeder and Glass Block Crafts
Brand: The Amazing Tile And Glass Cutter
Price: 69.96 USD

Amazon Price as of 02/10/2025 10:01 GMT+00:00

-6%

$69.96

$74.99

Price alert

Buy on Amazon

Deal Detector and Price History

We analyze price history to spot good deals

Include Prime Price

🎉 Great Deal

average price $72.47

$2.51 cheaper than average

$69.96 now

$71.22

$73.73

Price History

Product Description

Glass Cutter – Not just any Glass Cutting Tool The Amazing Glass Cutter made in UK a manual Glass Cutter that lets you cut straight radius and wavy lines in glass mirror, stained glass and glass tiles. The scoring wheel is not sharp, it is probably the dullest tool you will own but the hardest, the hardness of the cutter blade along with the special angle ground into the scoring wheel allows The Amazing Glass Cutter to cut thick and thin glass materials and even Hard Tile without hurting the wheel. The Secret to using The Amazing Glass Cutter is to follow the instructions carefully. Practice on a spare piece in order to work out enough pressure to apply, usually not enough pressure is applied to start with but sometimes less pressure is better so practice makes perfect. Cutting on the floor instead of on a solid board at waist height will fail and give uneven pressure along the score line and may even crack glass. Not oiling the scoring wheel and making sure it is turning very freely may cause the wheel to bind, drag and even lock up and just scratch the glass instead of evenly scoring it and this will prevent the glass cutter from working correctly. Holding the Glass Cutter by the plastic grips when scoring with your strongest hand means that you are only applying minimal amount of pressure if any on the cutting wheel at the point where the scoring is happening. Always Pull towards you not push Away. For Stained Glass, Plate Glass, Picture Framing Glass or Fused Glass the cutting wheel should be oiled every single score, oil will run down onto the glass and will not only cool down the glass and give a cleaner cut it will also extend the life of the cutting wheel. If you can wipe the oil off the glass and there is no score line visible, then you need to increase the pressure – make sure you are holding close to the wheel and use the 2 handed method if needed especially if you do not have a lot of strength in your hands or are cutting a very hard material.

• The Best Glass Cutter Kit For Cutting Thick Or Thin Glass And For Putting Holes In Thick Glass Wine Bottles And Glass Blocks Comes With Easy To Use Professional Glass Cutters Tool Watch Glass Cutting Videos Read Tips And Instructions And Download User Guide, Practice On Scrap Glass Before Making Final Cut For Best Results. • HOLD GLASS CUTTING TOOL – Handles Of Glass Cutter Tool Are Only For Squeezing Glass To Break, Do Not Hold Glass Cutter by Handles When Scoring. Hold Close To The Wheel for Control And Pressure on Glass Scorer. The Technique is to Create A Small V In Surface Of Glass Sheet. Scoring Way Too Hard Or Without Oiling Wheel Leaves A Wide Groove And White Dusty Line that Will Not Break On The Line Instead Of A Shallow V, The Perfect Glass Score Must Be Just Firm Enough To Leave the V Score in Glass. • GLASS DRILL BIT – 3/16” ¼” ½” Drill Bit For Glass Drill Bit For Bottles, These Glass Cutting Drill Bits For Drilling Holes In Glass Are To Be Used Wet, Glass Drilling Bits Will Also Drill Holes In Porcelain Tile So Not Just Drill Bits For Glass Sheet Also A Drill Bit For Glass Bottles And Drilling Holes In Glass Blocks For Making Wine Bottle Lamps And Lights. The ½” Glass Drill Bit is the Perfect size for Tree Lights to Push Through. On Flat Surfaces the Guides can be used To Hold Bits Straight • TILE DRILL BITS – 3/16 Tile Drill Bit ¼ Tile Drill Bit Spear Point Tile and Glass Drill Bits Can Be Used For Drilling Holes In Glass At Low Speed In A Drill Press Is Best. Drill Holes In Clay Pots Drill Holes For Drainage in Pots Drill Holes In China Plates And Cups. Build A Wall Around Area With Plumbers Putty Fill With Water To Create A Well Of Coolant. These Tungsten Pointed Tile Drill Bits can be used for Drilling Holes in Ceramic Tiles For Screw Holes for Grab Bars and Shower Doors. • Glass Hole Saw Bit For Cutting Larger Holes In Bottles And Glass Blocks For Making Lamps Bird Feeders, Glass Block Crafts And Also For Cutting Holes In Porcelain China Plates And Granite, This Is Also The Most Popular Size For Holes For Faucets And Shower Pipes. Use This Glass Hole Cutting Bit With Water To Keep Cool.

🔥 Top The Amazing Tile And Glass Cutter deals you shouldn’t miss!

10 in Carbide Rod Saw Blade 250mm x 10pk Tungsten Carbide RodSaw Blade with Eyelets for Adjustable Hacksaw Frame for Plaster Drywall Cement Board Fiberglass Tile and Cast Iron

$35.99

Great

Lowest