Dealscount Logo
grinding electric milling machine cereals
NICE CHOOSE

2pcs Grinding Sheets for Electric Grain Dry Feed Flour Milling Machine Cereals Grinder Rice Corn Grain Coffee Wheat

Amazon Price as of 02/19/2025 19:23 GMT+00:00

$24.00

Deal Detector and Price History

We analyze price history to spot good deals

Include Prime Price

🎉 Great Deal

average price $29.5

$5.5 cheaper than average

$24.00 now

$26.75

$32.25

Product Description

Easy to Install: 1. Open the front cover of the machine, remove the grinding disc, and then loosen the screws that fix the grinding sheets and take out. 2. Reinstall the new grinding sheets back to the original grinding sheets position and lock the screws, but DO NOT lock them first. First, observe the gap between the inner circle of the grinding sheets and the mounting step, and adjust the gap to ensure uniformity. Concentric with the motor shaft. Then tighten the screws. How to Adjust: 1. Put the moving grinding disc back into the grinding chamber, adjust the screw, turn it counterclockwise, then cover the front cover and lock it. 2. Start the motor and tighten the adjusting screw clockwise until the grinding piece rubs a sharp sound. Turn off the switch after the motor idles for two minutes. 3. Open the front cover, take out the grinding disc, observe the friction marks of the moving grinding piece and the static grinding piece tooth groove, and touch the grinding piece around the hand. If the friction marks on the grinding piece are evenly distributed, and the heat difference of the grinding piece is not obvious. This means that the grinding plate is installed in balance and can be used directly without adjustment. Please Note: 1.Do not use too much force, the three screws should be evenly applied and gradually locked. 2.We are always committed to providing the best products and services. Please feel free to contact us if you have any questions.

• ★ Model 150 grinder sheets for Electric Mill Grinder (B07QK4XHRG & B08FQXW7CS ). • ★ Install Steps:1. Open the front cover of the machine, remove the grinding disc, then loosen the screws that fix the grinding sheets and take out; 2. Reinstall the new grinding sheets back to the original grinding sheets position and lock the screws, not lock them first. First, observe the gap between the inner circle of the grinding sheets and the mounting step, and adjust the gap to ensure uniformity. Concentric with the motor shaft. Then tighten the screws. • ★ Model 150 grinder sheets also can be used for other Commercial Electric Feed Mill Dry Wet Grinder, please measure dimension before ordering • ★ Our products have lifetime free warranty and replacement parts policy, if you encounter any problems during use, please feel free to contact us. Our customer service department will help you solve any problems.

Reviews

Review AI Summary

🔥 Top
deals you shouldn’t miss!