Ade Advanced Optics Stingray Compact Size Mini Red Dot Sight for RMR Footprint/Mounting Plate/Slide/Plate Optics Ready Pistol - 6MOA

Product Description

Designed to fit any pistol mounting plate/slide/cut that is compatible with Trijicon RMR/SRO, Holosun 407C/507C/508T red dots. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens. ADE Stingray RED dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life. The brightness will turn high and low accordingly to the environment brightness. 6MOA RED dot One year battery life Weight approximately .88oz/25grams (Length)1.6" x (Width)1.1" x (Height).93" Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun.

• Ade Stingray is Designed to to the smallest and lightest red dot to fit any pistol mounting plate/slide/cut that is compatible with RMR/SRO, Holosun 407C/507C/508T footprint red dots. The overall length is around 15-20% shorter than other major competitors. The shorter design allow this sight to be able to sit in to all optic cuts/plates/adapters that designed for rmr. For some optics ready pistols with a large optic cut, there will be a gap between the optic rear dot and pistol rear iron sight. • Ade Stingray created a iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a "back up iron sight". With the ultra short design, the red dot provides a distance/gap on some of full size optics ready pistol, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. • For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacture equipped rear sight, ADE Stingray's rear white dot act as a pistol factory original rear sight for Co-Witness. • Does NOT fit optic plate/cut made for Doctor type footprint. Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun. • Just like $400 RMR competitors, It does not has a on/off power button. The light turns brighter or lower automatically. If you do not use it, put the provided rubber cover on it, then the sight will be "sleeping" in a very very low power mode. Weight approximately .88oz/25grams. Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens. 6 MOA dot. (Length)1.6" x (Width)1.1" x (Height).93" • Ade SPIKE created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distance/gap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight • For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacturer equipped rear sight, ADE Stingray's rear white dot will act as a pistol factory original rear sight for Co-Witness.