3M All Weather Flashing Tape 8067, 6 in x 75 ft, 1 Roll, Adhesive Backed Split Liner, Prevents Moisture Intrusion, Waterproof Flashing Seals Doors, Windows, Openings in Wood Frame Construction

Product Description

Product Description 3M All Weather Flashing Tape 8067 is a self-adhered, waterproof flashing membrane designed for sealing around openings and penetrations in exterior walls. This product has a unique acrylic pressure sensitive adhesive that aggressively sticks and stays stuck both at lower and higher application temperatures than traditional flashing tapes. It can be applied to materials without primers or staples and bonds in surface temperatures from 0 to 176F (-18 to 80C) per AAMA 711-05. It even adheres to damp surfaces. To prevent moisture intrusion, the thin backing construction effectively conforms and seals around nails and staples with less buildup under siding. This backing is also tough, resists punctures and tears, yet it is thin to fit conveniently into corners and under siding. Proprietary construction will not liquefy, bleed, or melt in contact with many building sealants or in extreme summer temperatures. The split paper release liner provides fast application with easy and accurate positioning of the tape Recommended applications include: sealing joints around sills, jambs and heads of rectangular windows in wood frame construction; sealing around other wall interruptions in non-roof areas, such as thresholds, dryer vents and hose bibs; when installed properly as a concealed flashing in vertical walls in frame construction, it prevents moisture intrusion or water leaks and avoids the costly problems caused by water infiltration. From the Manufacturer 3M™ All Weather Flashing Tape 8067 is a self-adhered, waterproof flashing membrane designed for sealing around openings and penetrations in exterior walls as well as for sealing joints in rigid air barriers. This product has a unique acrylic pressure sensitive adhesive that aggressively sticks and stays stuck both at lower and higher application temperatures than traditional flashing tapes. It even sticks to damp surfaces. The proprietary backing seals around nails and staples to prevent moisture intrusion. This backing is also tough, resists punctures and tears, yet it is thin to fit conveniently into corners and under siding. The split paper release liner provides fast application with easy and accurate positioning of the tape. 3M™ All Weather Flashing Tape 8067 features a film backing with pressure-sensitive acrylic adhesive. It is 0.25mm thick with an adhesion to Polyethylene and OSB of 66 N/100 mm width. Meets AAMA 711 Voluntary Specification for Self Adhering Flashing Use for Installation of Exterior Wall Fenestration Products. Flashing Tape 8067 is compatible with many building sealants: No adverse reaction with synthetic rubber, butyl, polyurethane, silicone and silane terminated hybrid sealants. Adhesive provides an unusual combination of both cold temperature and hot temperature adhesion to most substrates, which can extend the construction season in many climates. For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. 3M Industrial Adhesives and Tapes include application-specific products that provide durability, strength, and special characteristics such as temperature resistance and short- and long-term protection. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

• STICKS AND STAYS STUCK: Unique acrylic pressure sensitive adhesive sticks and stays stuck to seal around windows, doors and other openings – eliminating the need for primers or staples. • BONDS TO MOST COMMON BUILDING MATERIALS with surface temperatures as low as 0F (-18C) or as high as 176F (80C). It even adheres to damp surfaces. • CONFORMS AND SEALS: To prevent moisture intrusion, the thin backing construction effectively conforms and seals around nails and staples with less buildup under siding. • PASSES NAIL SEALABILITY before and after thermal cycling according to AAMA 711-05. • WILL NOT LIQUEFY, BLEED, OR MELT when in contact with many building sealants (i. e. , synthetic rubber, butyl, polyurethane, silicone, silane terminated hybrids) or in extreme summer temperatures. • For industrial/occupational use only. Not for consumer sale or use